• ATPMS-250
    Advanced TPMS Training Program
    (click here to select quantity)

    This program focuses on the manufacturer-specific requirements for the most popular domestic and import vehicle/sensor manufacturers. This program is designed to give the experienced technician more in-depth information regarding the identification, maintenance, reprogramming, and diagnostic procedures for all tire pressure monitoring systems.

    Advanced TPMS is comprised of four modules:
    • Module 1 TPMS Identification - focuses on identifying different types of TPMS and how to differentiate between a low tire indicator and a malfunction indicator.
    • Module 2 TPMS Service Requirements - demonstrates how to identify the proper service pack for the sensor as well as the installation procedures for all types of sensors.
    • Module 3 TPMS Relearn Procedures - uses the TPMS Relearn Chart and common electronic relearn tools to explain the relearn requirements for the most popular domestic and import vehicles.
    • Module 4 TPMS Diagnostics - covers the necessary steps to identify and correct a malfunction with common electronic tools.


     Non-Member Price: $300      Member Price: $150


  • ATPMS-250SW
    Advanced TPMS Student Workbook
    (click here to select quantity)


  • The Advanced TPMS Student Workbook comes with the final exam. Those that pass the exam receive a TIA Certificate of Completion.

    (Every student in each class needs a copy of the Workbook - they can be reused in future classes)

     
       
    Final pricing based on quantity purchased:
     
      1-10    Non-Member Price: $65       Member Price: $35
     
    11-25    Non-Member Price: $62       Member Price: $32
     
    26-50    Non-Member Price: $60       Member Price: $30
     
    51-99    Non-Member Price: $57       Member Price: $27
     
    100+    Non-Member Price: $55       Member Price: $25
     

    ATPMS-250TB
    Advanced TPMS Addtional Test Booklet
    (click here to select quantity)


     Non-Member Price: $40      Member Price: $20


    ATS-200
    Basic Automotive Tire Service Training & Certificate Program
    (click here to select quantity)

    Basic Automotive Tire Service (ATS) is a 200 Level minimum skills training and certificate program that outlines and explains the guidelines for servicing passenger and light truck tire and wheel assemblies. It includes a DVD, Instructor's Guide (lesson plans), 1 Student Workbook and 1 Final Exam. Additional Workbooks and Exams can be ordered for each technician in need of training.

    Basic ATS is comprised of ten modules:
  • Module 1 Introduction Covers personal protective equipment and general shop safety.
  • Module 2 Tires Covers tire construction, nomenclature, sizing, application and replacement guidelines.
  • Module 3 Wheels & Fasteners Covers wheel and rim nomenclature as well as fastener and bolt hole identification.
  • Module 4 Raising the Vehicle Addresses step-by-step procedures and safety guidelines for lifting a vehicle with an above-ground lift or floor jack and jack stands.
  • Module 5 Tire/Wheel Assembly Removal Covers the procedures for removing the assembly from the vehicle including wheel locks and wheel covers.
  • Module 6 Torque & Clamping Force Explains the relationship between torque and clamping force including lab tests that show the effects of lubricants.
  • Module 7 RIST Stands for Remove, Inspect, Snug and Torque. This module covers the steps for wheel installation using the RIST procedure.
  • Module 8 Demounting, Mounting & Inflation Covers the procedures for demounting, mounting and inflating tires on rims with valve stem and band-mounted sensors.
  • Module 9 Balance and Run-out Addresses the basic principles of balance and run-out including the use of pin-plates to secure the assembly to the balancer.
  • Module 10 Puncture Repair Covers the general industry guidelines for puncture repairs in passenger and light truck tires using one-piece and two-piece repair systems.
  •   1-10    Non-Member Price: $300       Member Price: $150




  • ATS-200SW
    Basic Automotive Tire Service - Student Workbook
    (click here to select quantity)

    Basic ATS Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $65       Member Price: $35
     11-25      Non-Member Price: $62       Member Price: $32
     26-50      Non-Member Price: $60       Member Price: $30
     51-99      Non-Member Price: $57       Member Price: $27

    ATS-200TB
    Basic Automotive Tire Service Addtional Final Exam Book
    (click here to select quantity)

    Basic ATS Addtional Final Exam Booklet
      1-10      Non-Member Price: $40       Member Price: $20

    BCTS_Virtual_2021
    Basic CTS Virtual Training Access Link
    (click here to select quantity)



    CTS-200
    Basic Commercial Tire Service Training & Certificate Program
    (click here to select quantity)

    According to the Occupational Safety & Health Administration (OSHA) Regulation 29 CFR 1910.177, any employee that handles truck tires and wheels must receive safety training and demonstrate their ability to perform the necessary tasks. The Basic Commercial Tire Service (CTS) Training and Certificate Program is designed to meet the minimum federal training requirements for both new hires and experienced employees in need of documented training.

    The Basic CTS Program includes 12 Modules and comes with a DVD, Instructor's Guide (lesson plans), 1 Student Workbook and 1 Final Exam Book. Additional Workbooks and Exams can be ordered for technicians in need of training.
  • Module 1 Safety Includes personal protective equipment, lifting safety, and other topics like heat stroke and frostbite prevention.
  • Module 2 Basic Tire Info Covers tire construction, sizing, nomenclature, inflation pressure, tread design and compound for different applications, speed rating and all special service ratings and identification.
  • Module 3 Rims and Wheels Outlines the difference between rims and wheels including the nomenclature for both assemblies. It will also identify and address the different type of hub and drum assemblies for commercial vehicles.
  • Module 4 OSHA Regulations The video includes the script for the OSHA Reg 29 CFR 1910.177 with images supporting the wording. The Workbook also includes the OSHA Demount/Mount and Rim Matching Charts.
  • Module 5 Jacking and Lifting Outlines procedures for properly jacking, lifting and supporting trucks, tractors and trailers. It focuses on jack and jack stand identification adn operation as well as proper position of each when lifting one, two or three axles.
  • Module 6 Torque An in-depth look at the relationship between torque and clamping force when installing wheels and rims.
  • Module 7 Wheel End Safety Addresses wheel end fires, commercial vehicle inspection, wheel-off prevention and wheel end maintenance.
  • Module 8 Hub-Pilot Wheels Puts the basic principles of the previous two modules to work with hub-pilot wheel removal as well as inspection and installation guidelines.
  • Module 9 Stud-Pilot Wheels Focuses on stud-pilot wheel removal, inspection and installation.
  • Module 10 Demountable Rims Addresses demountable rim removal, inspection and installation.
  • Module 11 Single-Piece Dedicated to single-piece demount, mount and inflation procedures with an increased emphasis on disc wheel inspection, valve stem installation (including torque) and concentric bead seating techniques.
  • Module 12 Multi-Piece Covers the basics for demounting, mounting and inflated 2- and 3-piece assemblies.
  •   1-10    Non-Member Price: $300       Member Price: $150




  • CTS-200SW
    Basic Commercial Tire Service Training & Certificate Student Workbook
    (click here to select quantity)

    Basic CTS Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $65       Member Price: $35
     11-25      Non-Member Price: $62       Member Price: $32
     26-50      Non-Member Price: $60       Member Price: $30
     51-99      Non-Member Price: $57       Member Price: $27

    CTS-200TB
    Basic CTS Additional Test
    (click here to select quantity)

    Basic CTS Addtional Final Exam Booklet
      1-10      Non-Member Price: $40       Member Price: $20

    CTS-SP200
    Basic Commercial Tire Service Training & Certificate Program - Spanish Version
    (click here to select quantity)

    According to the Occupational Safety & Health Administration (OSHA) Regulation 29 CFR 1910.177, any employee that handles truck tires and wheels must receive safety training and demonstrate their ability to perform the necessary tasks. The Basic Commercial Tire Service (CTS) Training and Certificate Program is designed to meet the minimum federal training requirements for both new hires and experienced employees in need of documented training.

    The Spanish Basic CTS Program includes 12 Modules and comes with a DVD, Instructor's Guide (lesson plans), 1 Student Workbook and 1 Final Exam Book. Additional Workbooks and Exams can be ordered for technicians in need of training.
      1-10    Non-Member Price: $300       Member Price: $150




  • CTS-SP200SW
    Basic Commercial Tire Service Student Workbook Spanish Version
    (click here to select quantity)

    Spanish Basic CTS Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $65       Member Price: $35
     11-25      Non-Member Price: $62       Member Price: $32
     26-50      Non-Member Price: $60       Member Price: $30
     51-99      Non-Member Price: $57       Member Price: $27

    CTS-SP200TB
    Basic Commercial Tire Service Final Exam Spanish Version
    (click here to select quantity)

    Spanish Basic CTS Addtional Final Exam Booklet
      1-10      Non-Member Price: $40       Member Price: $20

    ETS-200DVD
    Earthmover Tire Service Training Kit DVD version
    (click here to select quantity)

    The 3-hour video features 15 different modules that cover the basic safety guidelines for servicing OTR tires, wheels and rims in the field. The video is accompanied by a 200+ page workbook that features hundreds of four-color photos to outline the step-by-step procedures and various industry resources. Students that successfully complete the final exam will receive a TIA Certificate of Completion. Check out a 10 minute video trailer.

    Basic ETS is comprised of 15 modules:
    Module 1 –
    Introduction
    Module 2 –
    Tires, Rims & Valves
    Module 3 –
    Service Truck Operation
    Module 4 –
    Site Preparation & Equipment Lifting
    Module 5 – Hydraulic Bead Breakers & Rams
    Module 6 – Service One-Piece on Machine
    Module 7 – Service Three-Piece on Machine
    Module 8 – Service Five-Piece on Machine
    Module 9 – Service Double Gutter on Machine
    Module 10 – Service One-Piece Loose
    Module 11 – Service Three-Piece Loose
    Module 12 – Service Five-Piece Loose
    Module 13 – Wheel & Rim Fastening Systems
    Module 14 – Install & Remove Wheel Fitment
    Module 15 – Install and Remove Rim Fitment

    Please Note: In order to meet Part 46 MSHA requirements, companies must ensure that employees complete an 8-hour refresher course on an annual basis. Following the initial purchase of workbooks, companies can purchase separate Test Booklets a year later, and after the employees have completed the 8-hour classroom instruction, they can take the test and receive an updated Certificate and wallet ID card to reflect successful completion of the 8-hour refresher.

    Each Basic Earthmover Tire Service (ETS) Kit includes two DVD's, one Workbook, and one Test Booklet. Each Workbook also comes with a separate Test Booklet. Students who successfully complete the final exam will receive a TIA Certificate of Completion and a wallet ID card.

    (Shipping and handling additional.)
    Final pricing based on quantity purchased:
      1   Non-Member Price: $1,995       Member Price: $995
    2-5    Non-Member Price: $1,895   &

    ETS-200SW
    Earthmover Tire Service Student Workbook
    (click here to select quantity)

    ETS additional Student Workbook (includes one Test Booklet)
    Final pricing based on quantity purchased:
    1-9  Non-Member Price:
    $195       Member Price: $95

    10-19  Non-Member Price: $185       Member Price: $85
    20+ Non-Member Price: $175       Member Price: $75


    ETS-200TB
    Earthmover Tire Service Test Booklet
    (click here to select quantity)

    ETS Additional Test Booklet (does not include Student Workbook)
    Final pricing based on quantity purchased:
    1-9  Non-Member Price:
    $175       Member Price: $75

    10-19  Non-Member Price: $165       Member Price: $65
    20+ Non-Member Price: $150       Member Price: $50


    ETSSP-200DVD
    Earthmover Tire Service Training Kit - SPANISH VERSION
    (click here to select quantity)

    The 3-hour video features 15 different modules that cover the basic safety guidelines for servicing OTR tires, wheels and rims in the field. The video is accompanied by a 200+ page workbook that features hundreds of four-color photos to outline the step-by-step procedures and various industry resources. Students that successfully complete the final exam will receive a TIA Certificate of Completion. Check out a 10 minute video trailer.

    (Shipping and handling additional.)
    Final pricing based on quantity purchased:
      1   Non-Member Price: $1,995       Member Price: $995
    2-5    Non-Member Price: $1,895   &

    ETSSP-200SW
    Earthmover Tire Service Student Workbook - SPANISH VERSION
    (click here to select quantity)

    ETS additional Student Workbook (includes one Test Booklet)
    Final pricing based on quantity purchased:
    1-9  Non-Member Price:
    $195       Member Price: $95

    10-19  Non-Member Price: $185       Member Price: $85
    20+ Non-Member Price: $175       Member Price: $75


    ETSSP-200TB
    Earthmover Tire Service Test Booklet - SPANISH VERSION
    (click here to select quantity)

    ETS Additional Test Booklet (does not include Student Workbook)
    Final pricing based on quantity purchased:
    1-9  Non-Member Price:
    $175       Member Price: $75

    10-19  Non-Member Price: $165       Member Price: $65
    20+ Non-Member Price: $150       Member Price: $50


    FTS-200
    Basic Farm Tire Service Training Kit
    (click here to select quantity)



    This program outlines and explains the guidelines for servicing farm, agricultural and construction tire and wheel assemblies. The Basic FTS Program includes 11 Modules, plus an Appendix, and comes with a DVD, Instructor's Guide, 1 Student Workbook and 1 Final Exam. Additional Workbooks and Exams can be ordered for technicians in need of training.
  • Module 1 Introduction Covers the necessary PPE for servicing farm, agricultural and construction tires. It also addresses the primary hazards for technicians who service these assemblies so they understand the risks.
  • Module 2 Tires Outlines the construction, nomenclature, sizing, service description, speed rating and load capacity molded on the sidewall.
  • Module 3 Rims, Wheels and Valves Describes the different types of rims and wheels used on ag and construction equipment.
  • Module 4 Service Truck Operation and Maintenance Covers every aspect of the service truck, especially the operation, inspection and maintenance of the crane and compressor. Techs will also learn the steps for conducting a proper pre-trip inspection.
  • Module 5 Lifting the Machine Addresses the proper procedures for lifting different types of farm and construction equipment. Emphasis is placed on using the correct lifting points and utilizing cribbing or jack stands to support the weight of the machine during service.
  • Module 6 Hydraulic Tool Operation and Maintenance Describes the different types of hydraulic tools that are used to service farm, ag and construction tires. Techs will learn how to operate and maintain the tools and the hydraulic pump.
  • Module 7 Single Piece Demount, Mount & Inflate on Machine Outlines the procedures for demounting, mounting and inflating a single piece tubeless tire while it is still installed on the machine.
  • Module 8 Single Piece Demount, Mount & Inflate off Machine Describes the procedures for demounting, mounting and inflating a single piece tubeless tire when it is loose and off the machine. Procedures for demounting, mounting and inflating a tube-type assembly are also covered in this module.
  • Module 9 Dual Demount, Mount & Inflate Describes the procedures for demounting, mounting and inflating a single piece tubeless tire in a dual application.
  • Module 10 3-Piece Demount, Mount & Inflate on Machine Covers the procedures for demounting, mounting and inflating a tubeless tire on a 3-piece rim while it is still on the machine. Techs will also learn how to properly inspect the rim components to ensure they can be safely installed before the tire is inflated
  • Module 11 Install and Remove Liquid Ballast Addresses the guidelines for installing and removing liquid ballast. It covers the basic procedures for using calcium chloride as ballast material and addresses the safety guidelines that should be followed.
  • Appendix Includes valuable info that techs can use in the field on a regular basis - Load Index Chart, Size Comparison Chart, Calcium Chart and Tire & Rim Association charts.
  •     Non-Member Price: $600       Member Price: $295



  • FTS-200SW
    Basic Farm Tire Service Student Workbook
    (click here to select quantity)

    Basic Farm Tire Service Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $85       Member Price: $55
     11-25      Non-Member Price: $82       Member Price: $52
     26-50      Non-Member Price: $80       Member Price: $50
     51-99      Non-Member Price: $77       Member Price: $47

    FTS-200TB
    Basic Farm Tire Service Test Booklet
    (click here to select quantity)

    Basic Farm Tire Service Exam Bookletlet
      1-10      Non-Member Price: $60       Member Price: $30

    FTTS-200
    Fleet Tire Service OSHA Compliance Training Program
    (click here to select quantity)

    According to the Occupational Safety & Health Administration (OSHA) Regulation 29 CFR 1910.177, any employee that handles truck tires and wheels must receive safety training and demonstrate their ability to perform the necessary tasks. The Basic Commercial Tire Service (CTS) Training and Certificate Program is designed to meet the minimum federal training requirements for both new hires and experienced employees in need of documented training.

    The Fleet OSHA Compliance Program includes 12 Modules and comes with a DVD, Instructor's Guide (lesson plans), 1 Student Workbook and 1 Final Exam Book. Additional Workbooks and Exams can be ordered for technicians in need of training.
  • Module 1 Safety Includes personal protective equipment, lifting safety, and other topics like heat stroke and frostbite prevention.
  • Module 2 Basic Tire Info Covers tire construction, sizing, nomenclature, inflation pressure, tread design and compound for different applications, speed rating and all special service ratings and identification.
  • Module 3 Rims and Wheels Outlines the difference between rims and wheels including the nomenclature for both assemblies. It will also identify and address the different type of hub and drum assemblies for commercial vehicles.
  • Module 4 OSHA Regulations The video includes the script for the OSHA Reg 29 CFR 1910.177 with images supporting the wording. The Workbook also includes the OSHA Demount/Mount and Rim Matching Charts.
  • Module 5 Jacking and Lifting Outlines procedures for properly jacking, lifting and supporting trucks, tractors and trailers. It focuses on jack and jack stand identification adn operation as well as proper position of each when lifting one, two or three axles.
  • Module 6 Torque An in-depth look at the relationship between torque and clamping force when installing wheels and rims.
  • Module 7 Wheel End Safety Addresses wheel end fires, commercial vehicle inspection, wheel-off prevention and wheel end maintenance.
  • Module 8 Hub-Pilot Wheels Puts the basic principles of the previous two modules to work with hub-pilot wheel removal as well as inspection and installation guidelines.
  • Module 9 Stud-Pilot Wheels Focuses on stud-pilot wheel removal, inspection and installation.
  • Module 10 Demountable Rims Addresses demountable rim removal, inspection and installation.
  • Module 11 Single-Piece Dedicated to single-piece demount, mount and inflation procedures with an increased emphasis on disc wheel inspection, valve stem installation (including torque) and concentric bead seating techniques.
  • Module 12 Multi-Piece Covers the basics for demounting, mounting and inflated 2- and 3-piece assemblies.
  •   1-10    Non-Member Price: $300       Member Price: $150




  • FTTS-200SW
    Fleet Tire Service Training Student Workbook
    (click here to select quantity)

    Fleet OSHA Compliance Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $65       Member Price: $35
     11-25      Non-Member Price: $62       Member Price: $32
     26-50      Non-Member Price: $60       Member Price: $30
     51-99      Non-Member Price: $57       Member Price: $27

    FTTS-200TB
    Fleet Tire Service Addtional Test Booklets
    (click here to select quantity)

    Fleet OSHA Compliance Addtional Final Exam Booklet
      1-10      Non-Member Price: $40       Member Price: $20

    FTTS-SP200
    Fleet Tire Service OSHA Compliance Training Program - Spanish Version
    (click here to select quantity)

    According to the Occupational Safety & Health Administration (OSHA) Regulation 29 CFR 1910.177, any employee that handles truck tires and wheels must receive safety training and demonstrate their ability to perform the necessary tasks. The Basic Commercial Tire Service (CTS) Training and Certificate Program is designed to meet the minimum federal training requirements for both new hires and experienced employees in need of documented training.

    The Spanish Fleet OSHA Compliance Program includes 12 Modules and comes with a DVD, Instructor's Guide (lesson plans), 1 Student Workbook and 1 Final Exam Book. Additional Workbooks and Exams can be ordered for technicians in need of training.
  •   1-10    Non-Member Price: $300       Member Price: $150




  • FTTS-SP200SW
    Fleet Tire Service Training Student Workbook Spanish Version
    (click here to select quantity)

    Spanish Fleet OSHA Compliance Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $65       Member Price: $35
     11-25      Non-Member Price: $62       Member Price: $32
     26-50      Non-Member Price: $60       Member Price: $30
     51-99      Non-Member Price: $57       Member Price: $27

    FTTS-SP200TB
    Fleet Tire Service Final Exam Spanish Version
    (click here to select quantity)

    Spanish Fleet OSHA Compliance Addtional Final Exam Booklet
      1-10      Non-Member Price: $40       Member Price: $20

    ITS-200
    Basic Industrial Tire Service Training Kit
    (click here to select quantity)

    Basic ITS focuses on pneumatic, solid resilient, press-on and polyurethane-filled tires used in industrial applications. It covers the service procedures for different types of tire and rim assemblies. The Basic ITS Program includes 11 Modules, and comes with a DVD, Instructor's Guide, 1 Student Workbook and 1 Final Exam. Additional Workbooks and Exams can be ordered for technicians in need of training.
  • Module 1 Introduction Covers the required personal protective equipment (PPE) as well as the inflation equipment required by OSHA regulation 29 CFR 1910.177.
  • Module 2 Tires Addresses the unique size designations for pneumatic, solid resilient and press-on tires and explains their differences to ensure the proper fitment is used on industrial machines.
  • Module 3 Rims, Wheels and Hubs Describes the different types of rims, wheels and hubs that are used on pneumatic, solid and press-on tires. It also includes information on dimensions and explains how they are measured.
  • Module 4 Hydraulic Press Operation & Maintenance Solid resilient and press-on tires require a specialized hydraulic press. This module explains the basic principles for press operation and covers the regular inspection and maintenance guidelines that should be followed.
  • Module 5 Jacking & Lifting, Install and Remove Adresses the proper lifting and support procedures for different types of industrial equipment, and the steps for installing and removing different types of industrial tire assemblies.
  • Module 6 Single-Piece Service Procedures While most tires used on single-piece rims are tubeless pneumatic, a special type of solid resilient tire is also used on a singlie-piece rim. This module addresses the service procedures for both types of tires on single-piece rims.
  • Module 7 Two-Piece Service Procedures There are two types of two-piece rims used in industrial applications: traditional rim base with a side ring and bolt-together. This module covers the service procedures for pneumatic and solid resilient tires on both types of two-piece rims.
  • Module 8 Three-Piece Service Procedures Focuses on pneumatic and solid resilient tires used on three-piece rims, and explains the step-by-step service procedures for standard three-piece rims and three-piece rims that include a bead seat stand.
  • Module 9 Tube-Type/Tubeless Conversion Continental and Michelin have developed special systems that allow tubeless tires to be mounted on rims that typically require an innertube and flap. This module covers the installation procedures for both systems on two-piece and three-piece rims.
  • Module 10 Press-On Demount/Mount Addresses how to use the unique tools and equipment used for demounting and mounting press-on tires on different types of hubs.
  • Module 11 Poly Fill In applications where the flat proof qualities of solid resilient and press-on tires are needed but not available, standard tubeless and tube-type tires can be filled with polyurethane. This module covers the procedures and guidelines for installing polyurethane fill in standard tire and wheel assemblies.
  •    Non-Member Price: $600  Member Price: $295



  • ITS-200SW
    Basic Industrial Tire Service Student Workbook
    (click here to select quantity)

    Basic Industrial Tire Service Addtional Student Workbook (includes one Final Exam Booklet)

    Final pricing based on quantity purchased:
      1-10      Non-Member Price: $85       Member Price: $55
     11-25      Non-Member Price: $82       Member Price: $52
     26-50      Non-Member Price: $80       Member Price: $50
     51-99      Non-Member Price: $77       Member Price: $47

    ITS-200TB
    Basic Industrial Tire Service Test Booklet
    (click here to select quantity)

    Basic Industrial Tire Service Exam Bookletlet
       Non-Member Price: $60       Member Price: $30

    OTR-200
    OTR Tire Mount/Demount Training & Certificate Program 2001
    (click here to select quantity)

    The TIA OTR Mount/Demount Program covers eight tire mounting and demounting procedures on seven of the most common pieces of OTR equipment, using both bias and radial tires. With video technology, the program teaches vertical and horizontal mount and demount procedures for single-, three- and five-piece wheel and rim assemblies, and also includes a review of wheel and tire terminology.

    By focusing on specific tire sizes and pieces of OTR equipment, TIA can provide valuable instruction on the most commonly used loaders, graders and articulating haul trucks. The tires and equipment include: 17.5-25s on a 142G grader; 37.25R35s on a 631E scraper; 35/65R33s on a 988 front end loader; 23.5R25s on an articulated haul truck; 40.00R57 rear duals on an 830E haul truck; and a 40.00R57 front tire on a 793 haul truck. Service vehicles in the OTR Program utilize both cranes and tire hands to reflect the latest technology and techniques available for handling the world’s largest tire and wheel assemblies.

    A 140-page Program Book accompanies the video and becomes a valuable reference following the training. Additional Program Books are sold separately (OTRAB-200). TIA’s OTR Mount/ Demount Training and Certificate Program represents the industry’s most up-to-date educational program for instructing technicians on the safety guidelines for servicing multi-piece assemblies used on today’s OTR equipment.
     Non-Member Price: $230       Member Price: $150


    OTRAB-200
    OTR Tire Mount/Demount Additional Student Workbook
    (click here to select quantity)

    The 140-page OTR Program Book includes all of the material contained in the video and serves as a valuable reference in the field after training is completed. With its spiral binding and heavy-duty cover, the OTR Program Book better withstands the rigors of the OTR tire service environment.
     Non-Member Price: $75       Member Price: $50


    OTRT-200
    OTR Tire Mount/Demount Training & Certificate Program Test
    (click here to select quantity)

    Once the technician studies the Program Book, companies have the option of recognizing technician proficiency and achievement by administering the final exam. The TIA OTR Program Test includes a test booklet and answer sheet. Technicians that successfully complete the Test with a score of 70 percent or better receive a TIA Certificate of Completion.
     Non-Member Price: $25       Member Price: $25


    TPMS-200
    TPMS Video Training Program
    (click here to select quantity)

  • TIA’s TPMS Training Program is designed to provide technicians with a basic understanding of how different types of systems interact with the vehicle. It also includes the various types of service that technicians will need to perform in order to maintain the system. Since most TPMS utilize a valve stem sensor and many include run-flat tires, special attention is given to the step-by-step procedures for handling these assemblies.

    The TPMS Training Program also covers recalibration guidelines for many popular models and includes an appendix with relearn summaries and installation torque values for valve stem sensors. Each kit includes a 50-minute Video and DVD as well as a 120-page workbook that one technician can use to receive a TIA Certificate of Completion.

    Other Related Products:
    • Student Workbook must be ordered for every technician going through the Training Program TPMSAB-200.

     
    Final pricing based on quantity purchased:
      1-10    Non-Member Price: $300       Member Price: $150
    11-50    Non-Member Price: $290       Member Price: $140
    51-100    Non-Member Price: $280       Member Price: $130
    101-500    Non-Member Price: $270       Member Price: $120


    TPMS-200SB
    TPMS Student Workbook
    (click here to select quantity)

  • The TPMS Student Workbook must be ordered for every technician going through the Training Program. The workbook follows along with the video and includes the 40-question final exam, which will be sent in to TIA for grading. Those that pass the exam receive a TIA Certificate of Completion.

    (Every student needs a copy of the Workbook)

     
       
    Final pricing based on quantity purchased:
     
      1-10    Non-Member Price: $65       Member Price: $35
     
    11-25    Non-Member Price: $62       Member Price: $32
     
    26-50    Non-Member Price: $60       Member Price: $30
     
    51-99    Non-Member Price: $57       Member Price: $27
     
    100+    Non-Member Price: $55       Member Price: $25
     

     


    TPMS-200SV
    Spanish TPMS Video Training Kit
    (click here to select quantity)

  • TIA’s Spanish TPMS Training Program is designed to provide technicians with a basic understanding of how different types of systems interact with the vehicle. It also includes the various types of service that technicians will need to perform in order to maintain the system. Since most TPMS utilize a valve stem sensor and many include run-flat tires, special attention is given to the step-by-step procedures for handling these assemblies.

    The Spanish TPMS Training Program also covers recalibration guidelines for many popular models and includes an appendix with relearn summaries and installation torque values for valve stem sensors. Each kit includes a 50-minute Video and DVD as well as a 120-page workbook that one technician can use to receive a TIA Certificate of Completion.

    Other Related Products:
    • Student Workbook must be ordered for every technician going through the Training Program.

     
    Final pricing based on quantity purchased:
      1-10    Non-Member Price: $300       Member Price: $150
    11-50    Non-Member Price: $290       Member Price: $140
    51-100    Non-Member Price: $280       Member Price: $130
    101-500    Non-Member Price: $270       Member Price: $12


    TPMS-200SVSW
    Spanish TPMS Student Workbook
    (click here to select quantity)

    The TPMS Student Workbook must be ordered for every technician going through the Training Program. The Spanish workbook follows along with the video and includes the 40-question final exam, which will be sent in to TIA for grading. Those that pass the exam receive a TIA Certificate of Completion.

    (Every student needs a copy of the Workbook)

     
    Final pricing based on quantity purchased:
      1-10    Non-Member Price: $65       Member Price: $35
    11-25    Non-Member Price: $62       Member Price: $32
    26-50    Non-Member Price: $60       Member Price: $30
    51-99    Non-Member Price: $57       Member Price: $27
    100+    Non-Member Price: $55       Member Price: $25